RSS

3 Things to Look For During Your Performance Check

Marketing W. P. Law, Inc. - Thursday, October 26, 2017
Performance-Check-on-Irrigation-System

Everyone fancies lush green lawns and extensive green fields thanks to the innovations in irrigation. However, despite their prowess and precision watering capability, irrigation systems need to be regularly maintained to ensure they function properly.

If you are scheduling a performance check to determine if your irrigation equipment is functioning properly, here's what you can expect from the maintenance visit;

Pressure Check

To make sure that your irrigation system functions effectively and efficiently, the water pressure should be optimal. In most instances, low pressure is attributed to leaks, control valves not set (or operating) properly, airlocks, wrong direction of rotation and a damaged impeller.

Power consumption check

Sometimes pumps consume too much power. This is determined by checking the amperage draw when the pump is running. More often than not, high flow rates (caused by leaks or multiple zones running together) and mechanical defects are the main culprits of an upsurge in power usage.

Leaks

Leaks not only waste water, but they can cause other problems in your irrigation system as well. Large leaks can cause low pressure problems and pump power usage problems as mentioned earlier. When inspecting your irrigation system for leaks, check the mainline piping as well as isolation and zone control valves. If you are just starting your system for the first time in the spring, make sure that all drain valves (that were opened to winterize the system) are closed.

Valve diagnosis

Valves are a key component of any irrigation system. Making sure that they function properly should be of prime importance during any performance check. Control valves not only allow the system to be turned on and off but they also control the pressure going to the submain and lateral lines. The valve should be checked to see if opens and closes properly. Damaged diaphragms and malfunctioning solenoids can cause this problem. Control valves should also be checked to see if they are regulating pressure properly. Damaged control pilots and tubing can cause this problem.

At the end of this process, your irrigation equipment should be functioning properly and you may have saved yourself a few headaches down the road as well.

Trackback Link
http://wplawinc.com/BlogRetrieve.aspx?BlogID=8702&PostID=693863&A=Trackback
Trackbacks
Post has no trackbacks.

Find A Location Near You!

MAIN OFFICE - LEXINGTON

303 Riverchase Way
Lexington, SC 29072

Phone 803-461 -0599
Toll-Free 800-476-4515
Fax 803-461 -0598
Contact Us

 

MONDAY - FRIDAY
8:00am - 5:00pm

 

Summer Hours:

Effective March 11, 2017
thru August 26, 2017

SATURDAY
8:00 am - 12:00 pm
Counter Service Only

MONDAY - FRIDAY
5:00 pm - 6:00 pm
Counter Service Only

 

Need Directions?

CHARLESTON

3636 Belvedere Rd.
John's Island, SC 29455

Phone 843-559-3945
Fax 843-559-2740
Contact Us

 

MONDAY - FRIDAY ONLY
8:00 am - 5:00 pm

 

Need Directions?

GREENVILLE

1330 Grove Rd.
Greenville, SC 29605

Phone 864-295-3810
800-660-7569
Fax 864-295-6990
Contact Us

 

MONDAY - FRIDAY
8:00am - 5:00pm

 

Need Directions?

GREER

2400 Highway 101 S.
Greer, SC 29651

Phone 864-879-1045
877-835-0714
Fax 864-879-1 046
Contact Us

 

MONDAY - FRIDAY
8:00am - 5:00pm

 

Effective April 2, 2016
thru August 27, 2016
SATURDAY
8:00 am - 12:00 pm
Counter Service Only

 

Need Directions?